Maison > Produit > Machine à fumée > ULV450
ULV450
Ultra Low Volume Disinfection Portable Electric Cold Fogging Sprayer Machine
- Made with anti-corrosion material
- Strong power for spraying long range
- Great atomization and save more water
- Portable size with adjustable spraying angle
Fonctionnalité
Description
Precaution
Pourquoi nous choisir
Nos marques
Fonctionnalité
Description
Modèle | Portable Ultra Low Volume Sprayer 450 |
Material | ABS + PP |
Power | 1200 W |
Capacity | 4.5 L |
Fog Particles Size | 0-30 microns (Adjustable) |
Spraying Distance | 8-10 m |
Power Cord Length | 5 m |
Spraying Speed | 150-260 ml/min (Adjustable) |
Size | 43x26x43 cm |
Poids net | 4 kg |
Precaution
- This sprayer is NOT allowed to spray or fill flammable, explosive, highly corrosive substances, such as alcohol, gasoline, benzene and high concentration disinfectant (the disinfectant must be diluted before use).
- Please DO NOT use the sprayer in the tightly closed room. The doors and windows can be closed after spraying to increase the application effect.
- Please DO NOT clean the sprayer with Tianna water or gasoline. When cleaning the exterior of the machine with water or other neutral detergents, must be careful not to let water or neutral detergents into the motor casing.
- When the medicine box is filled with water, the spray needs to run for about 0.5-1 minute before start using, which is to clean the machine pipes, to avoid the liquid from corroding the machine, and to increase the service life of the machine. This is very important and necessary.
- After each use, the unused liquid must be poured out to maintain the machine’s condition.
- Avoid being placed in a high-temperature environment or under the sun for a long time, to prevent machine deform, fade or crack.
- Please remove the power cord properly by holding the rubber part of the plug.
Pourquoi nous choisir
- 40 ANS D'EXPÉRIENCE, le pionnier du pulvérisateur motorisé
- La marque haut de gamme assure au mieux notre qualité, 30 agents à l'étranger, 1 200 magasins en Chine.
- Matière première de haute qualité suffisante, traitement CNC, test 100%
- Équipe commerciale et technique professionnelle
Nos marques
